Purpose:  To facilitate the ability to enable and disable the complete traction control similar to pulling out fuse #28 in the fuse relay box in the underhood of my car.  What this does is 4-fold.  It totally disables the traction control (enabling HUGE burnouts).  It deactivates the air-conditioning pump, the ABS system and also the Magna-steer (steering becomes a little heavier, so expect it).

How is it done:  Running 2 wires from the back of the fuse-box junction in the engine compartment to the interior of the car to a switch.  At the fuse-box, add 2 wires where the fuse enters and "reroute" them to a switch in the inside of the car.  Splicing into this connection enables the switch inside the car to activate or deactivate the TCC.  This mod should be for track use only as it disables the ABS as well. 

Now here is the masterpiece as I call it.  Previously I had one large switch for the fan mod switch.  I wished to change this by replacing that part that holds the switch and move the switch to another location using a smaller one and perhaps adding 2 more for different functions.  Mike thought a second and came up with what is probably the best way to add 3 switches in a cosmetically attractive manner to my GTP.  He simply enlarged the hole already there slightly and the 3 switches went in sideways.  The end result is simply... sweet.  A picture is below... you be the judge!

(Click a picture for a full-size view)

What does each switch do:
Red:  Remote car starter OFF/ON (when available)
Blue:  High-speed fans OFF/ON   
Green:  Fuse #28 disable OFF/ON